Entry Level AutomationTM for Medical, Pharmaceutical, CBD & Cannabis
Security is a big issue in your area which can be addressed through automation. We have several pieces of equipment that can make this process seamless for you. Some examples include: Applying clear round wafer seals to boxes for tamper evident packages; or applying labels directly to the products to display for required information. Here is equipment that is used in these applications:
Mini Con L
Realizing a need in the market for a machine between a semi-automatic label dispenser and a full inline labeling system, Tach-It created a table top unit. This equipment will feed product on a conveyor through a wipe on label applicator and apply a label precisely on the desired location each time. The Mini-Con requires operator training or tools for label or product changeovers. The Mini Con L has a touch sensitive display screen where all settings are made and viewed, uses only non-contact sensors for product and labels, can apply 1 label or 2 labels (must be alternating on the web), has a product and target counter, a 10 inch wide high friction conveyor making it perfect for most applications, extra large roll capacity, and the reliability of stepper motors for consistent label placement. To use, an operator simply puts the items at one end of the conveyor and it travels under the label head, where the label is applied and exits at the other end of the conveyor.
Realizing a need in the market for a machine that can label bottles and round products that is between a semi-automatic label dispenser and a full inline labeling system, Tach-It created a table top unit that will feed the product on a conveyor through a wipe on label applicator and apply a label precisely at the desired location. The Mini-Con R requires no special operator training or tools for label or product changeovers, has a touch sensitive display screen where all settings are made and viewed, uses only non-contact sensors for product and labels, can apply 1 label or 2 labels (must be alternating on the web), has a product and target counter, a 4 1/4 inch wide high friction conveyor (wider conveyors are available) making it perfect for most applications, extra-large roll capacity, and the reliability of stepper motors for consistent label placement. To use, an operator simply puts the item to be labeled at one end of the conveyor and it travels along the label head, where the label is applied. The product then enters a vertical conveyor which rotates the bottle against a specially designed platen adhering the label to the product. The product then exits at the other end of the conveyor.
The Tach-It Model LB-7 Semi-Automatic bottle and cylindrical product labeler will put a label onto virtually any round product. Simply place the bottle into the adjustable cradle and pull down the handle on the overhead pressure rollers to start the cycle. Able to detect both transparent and opaque labels, the LB-7 is easy to use, has a small table top design, can label products from 3/4 inch to 6 inch in diameter, including most gallon jugs, and requires no operator training or special tools for usage.
Perfect for applying an L-Clip seal to small boxes or cartons using pressure sensitive labels or transparent wafer sealers. Once the machine is set up and loaded, the operator simply places the box to be sealed onto the top plate. Then, an easy push forward of the box over the roller will apply the label and feed the next one into position for the upcoming cycle. The easy-to-adjust product fixture ensures proper and consistent placement of the labels each time. Advantages of the model 6500 include a secure seal for all types of small boxes and cartons and is perfect for pharmaceuticals, medical packaging, food, and other items packed in small boxes. It works with all types of die-cut labels and wafer seals, easy to use and to load, no special operator training or tools are needed for label changeover and small table top design and heavy duty metal construction for many years of service.